Home > Products >  PAGA System  >  
24 port 10/100Mbps PoE switch
24 port 10/100Mbps PoE switch
Product model:KNPS-24-A
size:440 x 350x 44 mm
material:

KNPS-24-A 24port POE switch
Content

Overview
The 24 port 10/100Mbps PoE switch(with 2 gigabit Combo port ) with 400W internal
power, provides a easier installation way for your PoE devices (IP
cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE
standard. So the users do not need to worry about the PoE switch will damage their
PoE devices.The max transmission distance is 100 meters with Cat5
cables.Ideally,shorter cable would reduce the power degradation over the cables;
with high quality cables also can reduce power loss.Plug & play design make the
installation quite easy,users do not need any configuration,which make this PoE
switch a very good choice for IP cameras,wireless AP,VoIP users.

 

Key Features:
• 24-Port 10/100Mbps + 2 Gigabit Combo port
• Complies with the IEEE 802.3f/at standard
• Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) ,
1000/2000Mbps (Gigabit Ethernet).
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame
flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt /
CRC filtering eliminates erroneous packets to optimize the network bandwidth
•Non-blocking switching architecture that forwards and filters packets at full
wire-speed for maximum throughput
•8.8 Gbps Switching Capacity
•On/Off power switch

Technical specifications: